We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412008549
Description
Number of valve positions | 2 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Polyamide |
Number of wires | 25-pin |
Port size | D-Sub |
Type | Plug |
Compressed air connection input | 3/8″ |
Compressed air connection output | M7 |
DC operating voltage | 24 V |
Type | Base plate for a single or double solenoid valve |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412008549, catch up with FAMAGA, the world's key vendor of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each client. We appreciate everyone, who joined with us - therefore, our regular consumers pick up the most favorable purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Syria, Austria, Qatar, Slovenia, Malawi, Mozambique, Cuba, Bahamas, Libya, Japan, Honduras, Zambia, South Korea, Laos, Tajikistan, Guyana, Ukraine, Serbia, Belize, Mongolia, Romania, East Timor, Malaysia, Togo, Iraq, Senegal, Slovakia, Comoros, Tanzania, Switzerland, Latvia, Burkina Faso, Central African Republic, Mauritania, Poland, Angola, Nepal, Peru, Croatia, Tonga, Samoa, Mauritius. A well-shaped logistics system and a partnership network guide us to deliver our units anywhere in the globe with no delay without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or order, call us by phone or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Multipole |
Working pressure min./max. | See table |
Ambient temperature min./max. | -5 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
electr. connection | D-Sub plug, 25-pin, on the side, Link structure CMS |
Number of valve positions max. | 2 |
Grid dimension | 11,8 mm |
Rail mounting DIN EN 60715 | TH35 x 15 |
Exhaust (3,5) | With directional exhaust (3/5) |
Exhaust type | Ports separated |
Mounting screw | cross recessed DIN EN ISO 4757-Z0 |
Tightening torque for mounting screws | 0,2 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Double base plate principle |
Material |
---|
Base plate | Polyamide |
push-in fitting | Brass, nickel-plated |
Seal | Acrylonitrile butadiene rubber |
Screws | Steel |
Tie-rods | Aluminum |