We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176988, make contact with FAMAGA, the world's leading provider of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of spare parts and personalseparate attention to each client. We praise everyone, who cooperated with us - hence, our regular clients pick up the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly sign new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, France, Mauritius, Zambia, Lebanon, Italy, Grenada, Philippines, Central African Republic, Liechtenstein, Syria, Tonga, Burundi, Seychelles, New Zealand, Mozambique, Turkmenistan, Ireland, Rwanda, Togo, Poland, Ecuador, Laos, Brazil, Malta, Gambia, Swaziland, Bangladesh, Botswana, Argentina, Algeria, Australia, Cameroon, Thailand, Uruguay, Kiribati, Georgia, Eswatini, Kyrgyzstan, Mongolia, Albania, Paraguay, Switzerland. A well-elaborated logistics connection and a partnership network allow us to send our goods anywhere in the globe with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |