We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422702965
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422702965, catch up with FAMAGA, the world's foremost producer of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of merchandises and particular attention to each buyer. We esteem everyone, who engaged with us - so, our regular purchasers receive the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Slovenia, Seychelles, Burma, Gambia, Iceland, Canada, Vietnam, Romania, Albania, Djibouti, Uganda, Singapore, Central African Republic, United Arab Emirates, Bulgaria, Suriname, Brazil, Uruguay, Bolivia, Uzbekistan, Fiji, Mozambique, Brunei, Serbia, Cyprus, Nicaragua, Jamaica, Kazakhstan, Madagascar, Andorra, Angola, Luxembourg, El Salvador, Cameroon, Egypt, Armenia, Pakistan, Sweden, Poland, Czech Republic, East Timor, Argentina. A well-shaped logistics series and a partnership network guide us to conduct our products anywhere in the globe immediately without damaging product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as keep on top of it.
To request or book, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |