We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627704
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627704, connect FAMAGA, the world's chief retailer of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We cherish everyone, who liased with us - thus, our regular buyers pick up the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4500 such consumers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Oman, Latvia, Malawi, Azerbaijan, Lithuania, Eritrea, Djibouti, Monaco, Botswana, Luxembourg, Algeria, Japan, Equatorial Guinea, Togo, Iran, East Timor, Hungary, Sudan, Cape Verde, Ecuador, Angola, Afghanistan, Nepal, Samoa, Switzerland, El Salvador, Qatar, Senegal, Swaziland, Norway, Philippines, Finland, Jamaica, Andorra, South Korea, Laos, Ireland, Mauritius, Mexico, Kazakhstan, Zimbabwe, Slovakia. A well-shaped logistics bond and a partnership network cheer us to dispatch our goods anywhere in the globe as soon as possible without undermining product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Tie-rods | Stainless steel |