We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822343612
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 63 mm |
| Piston rod thread | M16x1,5 |
| Standardization | ISO 15552 |
| Stroke | 320 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 3/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Aventics (brand of Emerson) 0822343612, contact FAMAGA, the world's top company of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of products and private attention to each consumer. We cherish everyone, who engaged with us - so, our regular purchasers procure the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such customers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Gambia, Iran, Nicaragua, Jamaica, Cambodia, Guatemala, Liechtenstein, Laos, Belize, Chile, Mali, Ecuador, Burma, Mongolia, East Timor, Guinea, Mexico, Chad, Grenada, Lithuania, Philippines, Tonga, Thailand, Sudan, Niger, Nigeria, Ukraine, Sweden, Uganda, Estonia, Tanzania, Brazil, Eswatini, Togo, Kazakhstan, United States, Rwanda, The Gambia, Turkey, Kuwait, North Korea, Seychelles. A well-built logistics bond and a partnership network assist us to deliver our goods anywhere in the globe immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this number is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
