We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340906
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822340906, get in touch with FAMAGA, the world's primary company of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each orderer. We cherish everyone, who conspired with us - thus, our regular buyers get the most beneficial purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Comoros, Malaysia, Kazakhstan, Australia, Philippines, The Bahamas, Latvia, Burma, Oman, Brunei, Russia, Indonesia, Egypt, Monaco, Malta, Netherlands, Vietnam, Mozambique, Georgia, Macedonia, South Sudan, Albania, China, New Zealand, Dominica, Lithuania, Andorra, Luxembourg, Azerbaijan, Cyprus, Tajikistan, El Salvador, Costa Rica, Norway, Mauritius, Bosnia and Herzegovina, Switzerland, Serbia, Thailand, Mauritania, Burkina Faso, Sweden, Pakistan. A well-developed logistics connection and a partnership network allow us to dispatch our items anywhere in the earth promptly without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of industrial equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or book, phone us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |