We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001630
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001630, call FAMAGA, the world's key distributor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each consumer. We cherish everyone, who liased with us - therefore, our regular customers bring in the most desirable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Bangladesh, Laos, Costa Rica, Lebanon, Portugal, Eritrea, Iceland, Algeria, Bosnia and Herzegovina, Ukraine, Sierra Leone, Turkey, Serbia, North Korea, Namibia, Central African Republic, Armenia, Guatemala, Czech Republic, Slovakia, Turkmenistan, Ecuador, Comoros, Finland, Israel, Switzerland, Lithuania, Angola, Denmark, Macedonia, Benin, Kenya, Argentina, Rwanda, Antigua and Barbuda, Thailand, Australia, Andorra, Austria. A well-built logistics link and a partnership network allow us to deliver our goods anywhere in the globe with no delay without disreputing product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |