We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412017950
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
UR (Underwriters Laboratories) | |
Protection class | IP65,IP67,IP69K |
Nominal flow Qn | 700 l/min |
Compressed air connection input | Ø 8 |
Compressed air connection output | Ø 8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412017950, call FAMAGA, the world's chief vendor of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each buyer. We esteem everyone, who joined with us - so, our regular customers accept the most favorable purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cyprus, Bulgaria, Bangladesh, United States, Uzbekistan, Jamaica, Malaysia, Mauritius, Burundi, Myanmar, Switzerland, Singapore, Syria, Tajikistan, Mexico, Chad, Burkina Faso, Thailand, Egypt, Costa Rica, Serbia, Georgia, Iran, Monaco, Paraguay, Brazil, Comoros, Kenya, Kuwait, Latvia, Russia, Indonesia, Morocco, China, Malta, Togo, Madagascar, Ireland, Chile, Sweden, Namibia. A well-elaborated logistics chains and a partnership network assist us to deliver our products anywhere in the globe with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or make a request, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Certificates | UR (Underwriters Laboratories) |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 700 l/min |
Pilot control exhaust | With collective pilot air exhaust |
Protection class with connection | IP65 IP67 IP69K |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 13 ms |
Typ. switch-off time | 15 ms |
mounting screws | M5 |
Mounting screw tightening torque | 2 Nm |
Tightening torque tolerance | ±0,2 mT |
Weight | 0,165 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
For series QR2 fittings, see “Pneumatic connection technologies”. The inner valve can be replaced by all series CL03 valves described under "Valve systems". The pilot valve is UL (Underwriters Laboratories) certified. |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Hydrogenated acrylonitrile butadiene rubber |
Threaded bushing | Brass, nickel-plated Stainless steel |