We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340905
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822340905, reach FAMAGA, the world's top vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of outputs and special attention to each purchaser. We value everyone, who collaborated with us - therefore, our regular customers accept the most helpful purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such customers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Spain, Iceland, Mauritius, Lebanon, Paraguay, Croatia, Congo, Macedonia, Armenia, Burma, Vietnam, Monaco, Lithuania, Honduras, Belize, Singapore, Uruguay, Georgia, Senegal, Zimbabwe, Ghana, Fiji, Liberia, Slovakia, Ukraine, Tajikistan, Suriname, Liechtenstein, Afghanistan, New Zealand, Samoa, Sierra Leone, Uganda, Eswatini, Sudan, Russia, Argentina, China, Mali, Bangladesh, Austria, Indonesia, Cameroon, Seychelles. A advanced logistics system and a partnership network help us to send our goods anywhere in the planet on-time without undermining product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |