We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342504
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822342504, get in touch with FAMAGA, the world's top retailer of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each buyer. We appreciate everyone, who cooperated with us - so, our regular consumers bring in the most desirable purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such purchasers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Liberia, Bahamas, Czech Republic, Guinea, Algeria, Finland, Azerbaijan, Chile, Rwanda, Tunisia, Ireland, United Arab Emirates, Kazakhstan, Georgia, India, Croatia, Guyana, Serbia, Saudi Arabia, Cameroon, Bosnia and Herzegovina, Togo, Australia, Slovakia, Denmark, Jordan, Ukraine, Zimbabwe, Latvia, Switzerland, Tonga, Argentina, Eswatini, China, Senegal, Burkina Faso, Montenegro, Vietnam, Iraq, Antigua and Barbuda, Laos, Mauritius. A well-built logistics system and a partnership network assist us to dispatch our units anywhere in the globe on-time without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or book, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |