We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Aventics (brand of Emerson) R480176546, make contact with FAMAGA, the world's major company of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and particular attention to each consumer. We praise everyone, who liased with us - so, our regular consumers get the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Samoa, The Bahamas, Niger, Costa Rica, Eritrea, Brunei, Georgia, Ecuador, Myanmar, Moldova, Mauritius, Monaco, Tajikistan, Finland, Czech Republic, Guinea, Nicaragua, Sweden, Croatia, Malta, Nepal, Netherlands, Kuwait, Tunisia, El Salvador, Poland, Afghanistan, Pakistan, Jamaica, Cape Verde, South Sudan, Algeria, The Gambia, Swaziland, Macedonia, United Arab Emirates, Mauritania, Djibouti, Zambia, Ghana, Dominica, Laos, Panama, Togo, South Korea, Vietnam. A advanced logistics link and a partnership network let us to conduct our goods anywhere in the world immediately without disreputing product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |