We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480163016
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480163016, make contact with FAMAGA, the world's top vendor of mechanized equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each orderer. We value everyone, who joined with us - thus, our regular purchasers get the most convenient purchase terms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Mexico, Panama, Turkey, Guinea-Bissau, Bhutan, Croatia, Sri Lanka, Estonia, Oman, Ukraine, Azerbaijan, Bulgaria, Cyprus, Ecuador, Comoros, Uganda, Antigua and Barbuda, Vietnam, Gambia, Peru, Mongolia, Japan, Nigeria, Djibouti, Sweden, Costa Rica, Afghanistan, Luxembourg, Belarus, Bolivia, Cape Verde, South Sudan, Niger, Botswana, Kuwait, Egypt, Libya, Malaysia, Iraq, Qatar, Czech Republic, Pakistan, Guatemala, Suriname, Benin. A well-developed logistics network and a partnership network assist us to deliver our units anywhere in the planet on-time without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or make a request, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |