We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2611091220
Description
Standardization | ISO 5599-2 |
Frame size | ISO 1 |
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | ISO 5599-2 |
Protection class | IP65 |
Port size | ISO 5599-2 |
Type | Plug |
Qn 1▶2 | 1400 l/min |
Nominal flow Qn | 1400 l/min |
Compressed air connection input | Base plate DIN ISO 5599 size 1 |
Compressed air connection output | Base plate DIN ISO 5599 size 1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 2611091220, connect FAMAGA, the world's influential producer of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of merchandises and particular attention to each purchaser. We admire everyone, who joined with us - hence, our regular consumers receive the most convenient purchase terms and discounts on the industrial equipment market. At present, there are more than 4500 such consumers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Kazakhstan, Tanzania, Kuwait, Lesotho, Romania, Tonga, Portugal, Iceland, Grenada, Djibouti, Russia, Yemen, Eswatini, El Salvador, Austria, East Timor, Jamaica, Kenya, Guyana, Zambia, Albania, Gambia, Serbia, India, Uganda, Iraq, Ghana, Mongolia, Israel, Macedonia, Nigeria, Belize, Mauritania, Argentina, Australia, Chile, Mexico, Andorra, Tajikistan, Denmark, Comoros, Namibia, Slovakia, Central African Republic, Moldova. A well-built logistics connection and a partnership network assist us to dispatch our units anywhere in the world on-time without damaging product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our site. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-2, ISO 1 |
Connector standard | ISO 5599-2 |
Working pressure min./max. | 0 ... 10 bar |
Control pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1400 l/min |
Compressed air connection | according to ISO 5599 |
Protection class with connection | IP65 |
Protection class according to NEMA | NEMA 4 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Green |
Nominal resistance | 288 Ω |
Duty cycle | 100 % |
Typ. switch-on time | 16 ms |
Typ. switch-off time | 16 ms |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 3 Nm |
Weight | 0,35 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |