We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342502
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822342502, make contact with FAMAGA, the world's principle vendor of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each orderer. We praise everyone, who liased with us - hence, our regular clients procure the most convenient purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Brunei, Togo, Uruguay, Bahamas, Sri Lanka, Liberia, United Arab Emirates, Papua New Guinea, Finland, Nigeria, Antigua and Barbuda, Australia, Bolivia, Tunisia, Indonesia, Iraq, Tonga, China, Ecuador, Botswana, Mali, Fiji, Lithuania, Serbia, Costa Rica, Japan, Yemen, Samoa, Seychelles, Estonia, Albania, South Sudan, Georgia, Rwanda, Egypt, Dominica, Poland, Montenegro, Vietnam, The Gambia, Switzerland, Ghana, Guatemala, South Korea, Mauritius, Mauritania. A advanced logistics link and a partnership network assist us to conduct our units anywhere in the world promptly without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |