Aventics (brand of Emerson) R412019890
  Aventics (brand of Emerson) R412019890

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R412019890 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R412019890

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 100 mm
Piston rod thread M20
Standardization ISO 15524
Stroke 80 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 3/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R412019890

If you are questing Aventics (brand of Emerson) R412019890, communicate with FAMAGA, the world's prime retailer of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each customer. We praise everyone, who liased with us - hence, our regular buyers accept the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world . A well-built logistics link and a partnership network allow us to ship our goods anywhere in the world immediately without damaging product quality.

A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of machine made streamlined equipment.

All products from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is growing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.

To get some advice or make a request, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features R412019890

Standards ISO 15524
Compressed air connection Internal thread
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Use our Internet configurator to order variants with an external thread.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Brass Aluminum
End cover Aluminum
Seal Nitrile butadiene rubber Polyurethane
Scraper Nitrile butadiene rubber Polyurethane
See table for additional data on materials.