Aventics (brand of Emerson) R480627540
  Aventics (brand of Emerson) R480627540

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480627540 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480627540

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 250 mm
Piston rod thread M42x2
Standardization ISO 15552
Stroke 160 mm
Sealing material Acrylonitrile butadiene rubber
Scraper Acrylonitrile butadiene rubber
ATEX optional
Compressed air connection G 1
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480627540

If you are questing Aventics (brand of Emerson) R480627540, make contact with FAMAGA, the world's primary company of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each purchaser. We cherish everyone, who engaged with us - therefore, our regular customers receive the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such buyers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world . A well-built logistics connection and a partnership network assist us to send our goods anywhere in the world as soon as possible without damaging product quality.

A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.

All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this amount is rising every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as stay in control.

To inquire or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R480627540

Standards ISO 15552
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Acrylonitrile butadiene rubber
Nut for piston rod Steel, galvanized
Scraper Acrylonitrile butadiene rubber
Trunnion mounting Nodular graphite iron
Tie-rods Stainless steel