We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013664
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412013664, make contact with FAMAGA, the world's the best provider of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of goods and personalseparate attention to each purchaser. We praise everyone, who collaborated with us - therefore, our regular buyers procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Bangladesh, South Africa, Qatar, Namibia, Samoa, Burundi, Bulgaria, Ukraine, Lebanon, Azerbaijan, Burma, Benin, Montenegro, Burkina Faso, Belize, Cameroon, South Korea, Saudi Arabia, Chad, Kyrgyzstan, Libya, Turkmenistan, Gambia, Egypt, Czech Republic, Switzerland, Philippines, Iceland, The Gambia, India, South Sudan, Eswatini, Central African Republic, Iraq, Argentina, Greece, Kuwait, Chile, Kazakhstan, Tanzania, Georgia, Macedonia, Turkey, Rwanda, Malta, Latvia. A advanced logistics network and a partnership network let us to send our items anywhere in the world as soon as possible without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To consult or make a request, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |