We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1025200000
Description
Functional principle | Single-acting, retracted without pressure |
Piston diameter | 113 mm |
Piston rod thread | M16 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 1025200000, make contact with FAMAGA, the world's top retailer of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of outcomes and particular attention to each buyer. We praise everyone, who conspired with us - thus, our regular buyers bring in the most beneficial purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Myanmar, Netherlands, Papua New Guinea, Zambia, Latvia, Paraguay, Djibouti, Honduras, Tajikistan, Ireland, Bahamas, Switzerland, Angola, Ghana, Zimbabwe, Australia, Togo, Luxembourg, Monaco, New Zealand, Croatia, Malaysia, Sweden, Turkmenistan, Syria, United Arab Emirates, Turkey, Dominica, Argentina, Iceland, South Korea, India, Mauritania, Kenya, Pakistan, Antigua and Barbuda, Cyprus, Madagascar, Mexico, El Salvador, Kuwait, Costa Rica, Botswana, Armenia, Guatemala, Jordan, Suriname, Serbia, Algeria. A well-shaped logistics series and a partnership network allow us to send our goods anywhere in the planet as soon as possible without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is amounting every day. We are happy that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as stay in control.
To get some advice or book, phone us or write to the online chat on our site. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Diaphragm actuator strokes are tolerance-dependent. Tolerance at 40 mm , 50 mm , 80 mm stroke: ± 3 mm |
Material |
---|
Cylinder tube | Steel |
Piston rod | Steel |
Front cover | Steel |
Seal | Acrylonitrile butadiene rubber |