We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R480637920 (SSI-SA-012-0005-2-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI
Part number
R480637920
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637920 (SSI-SA-012-0005-2-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI R480637920, connect FAMAGA, the world's chief vendor of mechanized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each customer. We admire everyone, who joined with us - so, our regular customers accept the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Barbados, Slovakia, Slovenia, Russia, South Africa, Kyrgyzstan, Israel, Nepal, Myanmar, Costa Rica, Namibia, Kazakhstan, Belize, Bosnia and Herzegovina, Uruguay, Belarus, Canada, Azerbaijan, Switzerland, Iraq, Antigua and Barbuda, Malawi, Estonia, India, Liberia, Czech Republic, New Zealand, Niger, Turkey, Moldova, Bulgaria, Mali, Libya, Kiribati, Zambia, Haiti, Sudan, Djibouti, Jordan, Tanzania, Montenegro, Rwanda, Iran, Iceland, Eswatini, Cape Verde, Austria, Luxembourg. A well-built logistics link and a partnership network assist us to send our elements anywhere in the world promptly without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Please note that this variant does not use a scraper. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |