We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471322877
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7471322877, catch up with FAMAGA, the world's top producer of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are represented in the quality of outcomes and special attention to each buyer. We esteem everyone, who collaborated with us - thus, our regular clients procure the most attractive purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Guinea-Bissau, Rwanda, Bhutan, Myanmar, Finland, Algeria, Colombia, Kyrgyzstan, Lebanon, Saudi Arabia, Greece, Costa Rica, Liechtenstein, Grenada, Slovakia, Iran, Moldova, Niger, Peru, Denmark, Libya, Czech Republic, North Korea, Tajikistan, Syria, Dominica, Antigua and Barbuda, Ecuador, Latvia, Serbia, Nigeria, Montenegro, Brazil, Mexico, Tanzania, Cameroon, Armenia, Suriname, Kazakhstan, Australia, Ukraine, Central African Republic. A well-shaped logistics chains and a partnership network let us to conduct our goods anywhere in the planet as soon as possible without undermining product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this amount is rising every day. We are happy that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, phone us or write a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |