We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822398202
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822398202, make contact with FAMAGA, the world's major distributor of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of merchandises and particular attention to each customer. We understand everyone, who liased with us - hence, our regular purchasers bring in the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Palestine, Latvia, The Bahamas, Singapore, Brazil, France, Saudi Arabia, Madagascar, Netherlands, Egypt, Honduras, Georgia, Guyana, Seychelles, East Timor, South Korea, Mozambique, Argentina, Djibouti, Brunei, Indonesia, Switzerland, Fiji, Bosnia and Herzegovina, Sierra Leone, Cyprus, Philippines, Iran, Namibia, Pakistan, Morocco, Poland, Turkey, Cape Verde, United Arab Emirates, Samoa, Algeria, Kuwait, Mauritius, Serbia, Zimbabwe. A advanced logistics link and a partnership network cheer us to ship our items anywhere in the world on-time without damaging product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or book, contact us or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |