We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471327025
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7471327025, call FAMAGA, the world's major vendor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are portrayed in the quality of products and special attention to each buyer. We praise everyone, who joined with us - thus, our regular consumers accept the most acceptable purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such buyers, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Eswatini, Papua New Guinea, Peru, Algeria, Monaco, Japan, Andorra, Armenia, Malaysia, Zimbabwe, Switzerland, Guatemala, Albania, North Korea, Fiji, Romania, Chad, Sudan, Madagascar, Jordan, Mexico, Luxembourg, Poland, Mauritania, United Arab Emirates, Estonia, Bangladesh, Dominica, Ukraine, Angola, Vietnam, Brunei, Seychelles, Sweden, Samoa, Djibouti, Lithuania, Kuwait, Argentina. A well-elaborated logistics chains and a partnership network allow us to send our goods anywhere in the earth immediately without discrediting product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this quantity is rising every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To ask a question or make a request, contact us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |