We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822343002
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822343002, contact FAMAGA, the world's top producer of manufacturing equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of products and particular attention to each consumer. We value everyone, who cooperated with us - therefore, our regular purchasers receive the most attractive purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Finland, Turkmenistan, Israel, Burma, North Korea, Malta, Peru, Egypt, Iceland, Monaco, Palestine, Mali, Montenegro, Rwanda, Luxembourg, Eswatini, Guinea, Philippines, Liechtenstein, Equatorial Guinea, Togo, Uganda, Chad, Chile, Australia, Senegal, Lithuania, Slovakia, Tunisia, Benin, Ukraine, Greece, Iraq, Uruguay, Cameroon, Czech Republic, Moldova, Mozambique, Antigua and Barbuda, Afghanistan. A well-built logistics network and a partnership network allow us to ship our units anywhere in the planet as soon as possible without disreputing product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |