We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480176896
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | 1/2-20 UNF |
Stroke | 152.4 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/4 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480176896, make contact with FAMAGA, the world's top supplier of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and special attention to each client. We praise everyone, who collaborated with us - therefore, our regular customers pick up the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Greece, Fiji, Poland, Oman, Qatar, Malaysia, Zambia, Chile, Peru, Uzbekistan, Colombia, Benin, Brunei, Mozambique, Mongolia, Vietnam, Singapore, North Korea, South Sudan, Haiti, Kiribati, East Timor, Monaco, Burkina Faso, Suriname, Swaziland, Pakistan, Belarus, Philippines, Moldova, Djibouti, Botswana, Tajikistan, Dominica, Croatia, Comoros, Guatemala, Libya, Jamaica, Ghana. A well-built logistics connection and a partnership network allow us to dispatch our items anywhere in the planet as soon as possible without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |