We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822242405
Description
| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Piston diameter | 50 mm |
| Piston rod thread | M16x1,5 |
| Standardization | ISO 15552 |
| Stroke | 160 mm |
| Sealing material | Fluorocaoutchouc |
| Scraper | Fluorocaoutchouc |
| Compressed air connection | G 1/4 |
| Compressed air connection type | Internal thread |
| Temperature resistance | Heat resistant |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Aventics (brand of Emerson) 0822242405, call FAMAGA, the world's major vendor of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each customer. We praise everyone, who liased with us - thus, our regular clients procure the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Argentina, El Salvador, Comoros, Eritrea, United Arab Emirates, Panama, Mali, Rwanda, Samoa, Slovenia, Azerbaijan, Oman, Guatemala, Kuwait, Mexico, Lithuania, Togo, Netherlands, Denmark, Romania, Nigeria, Haiti, Nicaragua, Mozambique, Syria, Morocco, United States, Poland, Qatar, Slovakia, Estonia, Ireland, Angola, Mauritius, Cyprus, Latvia, Belarus, Kazakhstan, Malaysia, Senegal. A advanced logistics link and a partnership network allow us to conduct our goods anywhere in the world quickly without discrediting product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To consult or order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -10 ... 150 °C |
| Medium temperature min./max. | -10 ... 150 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Fluorocaoutchouc |
| Nut for piston rod | Steel, galvanized |
| Scraper | Fluorocaoutchouc |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
