We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011178
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant I, with 2 x 3/2-directional valve |
Version | 4x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412011178, make contact with FAMAGA, the world's top producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are represented in the quality of spare parts and personalseparate attention to each consumer. We praise everyone, who collaborated with us - hence, our regular clients obtain the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Egypt, Tunisia, Ghana, Spain, Gambia, Ukraine, Kenya, Ireland, Comoros, Argentina, Guinea, Angola, Saudi Arabia, Hungary, Uruguay, Montenegro, Benin, Armenia, Uzbekistan, Switzerland, Liberia, Albania, Netherlands, Belize, Austria, Algeria, Uganda, Slovakia, Paraguay, Tanzania, South Korea, Laos, Chile, Cameroon, Sierra Leone, Norway, Senegal, Kyrgyzstan, Brunei, Eswatini, Nepal. A advanced logistics link and a partnership network guide us to send our items anywhere in the planet quickly without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To consult or make a request, contact us or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |