We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822067000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822067000, communicate with FAMAGA, the world's influential company of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of spare parts and special attention to each customer. We cherish everyone, who joined with us - thus, our regular buyers bring in the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Colombia, Cambodia, Mozambique, Eritrea, Panama, Cyprus, Oman, New Zealand, Lebanon, Morocco, Croatia, Romania, Belarus, Russia, United Arab Emirates, East Timor, Liechtenstein, Singapore, Afghanistan, Botswana, Bhutan, South Korea, Jordan, Latvia, Suriname, Pakistan, Benin, Brunei, United States, Madagascar, Albania, Egypt, Jamaica, Brazil, Cape Verde, Ireland, The Gambia, Haiti, Vietnam, Yemen, Seychelles, Thailand, Bolivia, Uganda. A well-developed logistics network and a partnership network let us to dispatch our products anywhere in the globe promptly without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |