We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822432303
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822432303, reach FAMAGA, the world's chief distributor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each customer. We respect everyone, who liased with us - therefore, our regular buyers accept the most favorable purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, The Bahamas, Oman, Kuwait, Peru, Mongolia, Cuba, France, Madagascar, Cape Verde, Honduras, Kiribati, Swaziland, Slovenia, Nigeria, Slovakia, Estonia, United Arab Emirates, Uruguay, Eritrea, New Zealand, Cyprus, Switzerland, Singapore, Tonga, Fiji, United States, Ireland, Algeria, Jamaica, Croatia, Iraq, Bosnia and Herzegovina, Panama, Sudan, El Salvador, Czech Republic, Jordan, Georgia, Seychelles, Belarus, Nepal, Finland, China, Namibia, Dominica, Israel. A well-elaborated logistics link and a partnership network guide us to send our units anywhere in the world quickly without disreputing product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |