We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822432203
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822432203, catch up with FAMAGA, the world's major retailer of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and special attention to each customer. We understand everyone, who engaged with us - thus, our regular customers bring in the most flexible purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Grenada, Australia, Zambia, Albania, Myanmar, Papua New Guinea, Bulgaria, Nigeria, Guinea, Cape Verde, Iran, Lebanon, Serbia, Belarus, Iceland, Norway, Dominica, Chad, Sweden, Eswatini, Ukraine, Malawi, Cyprus, Ecuador, Brazil, Niger, Zimbabwe, Malta, Tonga, Tajikistan, Turkmenistan, Tanzania, Costa Rica, Jordan, Comoros, Georgia, Cameroon, Paraguay, Israel, New Zealand, Greece, Armenia, United States, Bangladesh, Poland. A well-developed logistics network and a partnership network guide us to deliver our units anywhere in the globe quickly without compromising product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |