We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177222
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 76.2 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480177222, get in touch with FAMAGA, the world's foremost company of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and personalseparate attention to each customer. We respect everyone, who engaged with us - thus, our regular customers accept the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Brunei, Bulgaria, Myanmar, Jamaica, Cameroon, Slovenia, Afghanistan, Cyprus, Paraguay, Netherlands, Malaysia, Ghana, Colombia, Sudan, Latvia, Burkina Faso, Mauritania, Poland, Niger, Serbia, Sweden, Dominica, Benin, United Arab Emirates, Ireland, Togo, Belarus, Finland, Fiji, South Sudan, Greece, Bolivia, Botswana, El Salvador, Costa Rica, Vietnam, Swaziland, Mexico, New Zealand, Cape Verde, Iraq. A well-elaborated logistics chains and a partnership network let us to send our units anywhere in the globe promptly without compromising product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |