We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010532
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M5 |
Stroke | 15 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822010532, make contact with FAMAGA, the world's primary company of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of goods and individual attention to each orderer. We esteem everyone, who joined with us - thus, our regular clients procure the most helpful purchase terms and discounts on the factory-made equipment market. Today, there are more than 3500 such clients, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Haiti, Algeria, Uzbekistan, China, India, Nicaragua, Syria, Peru, Central African Republic, Luxembourg, Sudan, Fiji, Netherlands, East Timor, Swaziland, Brunei, Nepal, Montenegro, Belarus, Gambia, Guyana, Mexico, Finland, Latvia, Benin, Yemen, Poland, Panama, United Arab Emirates, Czech Republic, Botswana, Comoros, Andorra, Samoa, Tajikistan, Dominica, Jamaica, Guatemala, Switzerland. A well-shaped logistics bond and a partnership network guide us to conduct our products anywhere in the planet on-time without damaging product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as stay in control.
To inquire or book, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |