We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5802680000
Description
| Standardization | ISO 5599-1 |
| Accessory type | type K |
| Number of valve positions | 1 |
| Frame size | ISO 2 |
| Sealing material | Acrylonitrile butadiene rubber |
| Subbase | Die-cast aluminum |
| Compressed air connection input | G 3/8 |
| Compressed air connection output | G 3/8 |
| Type | Intermediate plate for separate air supply |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 5802680000, get in touch with FAMAGA, the world's prime supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of merchandises and individual attention to each purchaser. We respect everyone, who conspired with us - therefore, our regular clients procure the most flexible purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4500 such clients, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Bosnia and Herzegovina, Tajikistan, Fiji, Nigeria, Luxembourg, Ecuador, Equatorial Guinea, Lithuania, East Timor, Myanmar, Laos, Haiti, Belize, Gambia, Algeria, Australia, Thailand, Uruguay, Yemen, Rwanda, Nicaragua, Azerbaijan, Ghana, Mali, Bulgaria, Brazil, Iran, Libya, Norway, Kenya, Mexico, Moldova, Kazakhstan, United Arab Emirates, Namibia, The Gambia, Sudan, North Korea, Chile, Macedonia. A well-built logistics system and a partnership network allow us to send our goods anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | ISO 5599-1 |
| Working pressure min./max. | -1 ... 16 bar |
| Ambient temperature min./max. | -20 ... 70 °C |
| Medium temperature min./max. | -20 ... 70 °C |
| Medium | Compressed air |
| Number of valve positions max. | 1 |
| Direction of pneumatic port (1) | Down |
| Direction of pneumatic port (3,5) | Down |
| Direction of pneumatic port (2,4) | Down |
| Direction of pneumatic port (14) | Down |
| Exhaust (3,5) | uncollected exhaust |
| Exhaust type | Ports separated |
| Weight | See table |
| An example configuration is illustrated. The delivered product may thus deviate from the illustration. |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Base plate | Die-cast aluminum, black painted |
| Seal | Acrylonitrile butadiene rubber |
