We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822432302
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822432302, contact FAMAGA, the world's central company of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each client. We appreciate everyone, who cooperated with us - thus, our regular clients pick up the most desirable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Uzbekistan, Singapore, Swaziland, Burma, Iran, Croatia, Luxembourg, Liberia, Monaco, Lebanon, Brazil, Australia, Montenegro, Norway, Egypt, Eritrea, Netherlands, United States, Cameroon, Ukraine, Yemen, Thailand, Estonia, Moldova, Qatar, Switzerland, Slovakia, China, Chile, Bolivia, South Sudan, Namibia, Ireland, Tunisia, Belize, Kiribati, Sweden, Senegal, Equatorial Guinea, Lithuania, Malaysia. A advanced logistics system and a partnership network let us to conduct our goods anywhere in the globe as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |