We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1320805000
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 8 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1320805000, reach FAMAGA, the world's prime retailer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of products and private attention to each user. We admire everyone, who conspired with us - therefore, our regular consumers accept the most acceptable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such clients, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Liechtenstein, Eritrea, Nepal, Bhutan, New Zealand, Qatar, Peru, Uzbekistan, Guyana, Guinea, Slovakia, Uruguay, Senegal, Ukraine, Belarus, Japan, Monaco, Guatemala, North Korea, Kiribati, Kuwait, Australia, Serbia, Niger, Panama, Togo, Hungary, Estonia, Israel, Djibouti, El Salvador, Moldova, Egypt, Malta, Jordan, Armenia, Syria, Thailand, Iraq, Mali, Cyprus. A well-built logistics link and a partnership network cheer us to deliver our products anywhere in the globe on-time without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To inquire or book, call us by phone or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |