We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822432301
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822432301, reach FAMAGA, the world's chief distributor of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and individual attention to each customer. We understand everyone, who liased with us - thus, our regular customers accept the most flexible purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Malta, Russia, Haiti, Liechtenstein, Sierra Leone, China, Guatemala, Tunisia, Bhutan, Jamaica, Turkmenistan, Austria, Bosnia and Herzegovina, Bangladesh, Zambia, Latvia, Angola, The Gambia, Comoros, Macedonia, Greece, Costa Rica, Iraq, Ireland, Paraguay, Estonia, Finland, Ghana, Benin, Montenegro, Samoa, Cyprus, Czech Republic, Mexico, Ukraine, Eswatini, Namibia, Antigua and Barbuda, Equatorial Guinea, Qatar, Israel, Cape Verde. A well-developed logistics link and a partnership network allow us to deliver our items anywhere in the globe quickly without discrediting product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |