We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822432201
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822432201, communicate with FAMAGA, the world's leading supplier of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each client. We appreciate everyone, who collaborated with us - thus, our regular buyers receive the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, North Korea, El Salvador, Côte d\'Ivoire, Zimbabwe, Azerbaijan, Bosnia and Herzegovina, Cape Verde, Egypt, Cameroon, Grenada, Philippines, Liechtenstein, Kazakhstan, Belgium, Sudan, Lithuania, Madagascar, The Gambia, Georgia, Mexico, Kiribati, Mali, Haiti, Sierra Leone, Guatemala, Austria, Luxembourg, Samoa, Montenegro, United States, Bulgaria, Pakistan, Panama, Libya, Afghanistan, Macedonia, Tanzania, Argentina, Tunisia, Algeria, Cyprus, Rwanda, Estonia. A well-elaborated logistics chains and a partnership network let us to send our goods anywhere in the globe immediately without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |