We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226601000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5226601000, communicate with FAMAGA, the world's influential vendor of mechanized equipment. Our company has operated for more than ten years - these are ages of experience, which are represented in the quality of merchandises and private attention to each orderer. We appreciate everyone, who worked with us - hence, our regular consumers procure the most favorable purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Andorra, The Gambia, South Africa, Belize, Portugal, Luxembourg, Belarus, North Korea, Malaysia, Ecuador, Montenegro, Burma, Algeria, Mali, Brunei, Jamaica, Philippines, Latvia, Armenia, Argentina, Tajikistan, Saudi Arabia, Mauritania, Ghana, Peru, Botswana, Senegal, Guatemala, Turkey, Benin, Vietnam, Austria, Madagascar, India, Kenya, Brazil, Malta, Sierra Leone, United Arab Emirates, Czech Republic, Serbia. A well-built logistics network and a partnership network guide us to send our elements anywhere in the world promptly without damaging product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |