We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503240
Description
Number of valve positions | 5 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
Compressed air connection input | G 1/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1825503240, contact FAMAGA, the world's prime retailer of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and particular attention to each user. We cherish everyone, who cooperated with us - so, our regular buyers procure the most beneficial purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such clients, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cyprus, Antigua and Barbuda, Guinea-Bissau, El Salvador, Dominican Republic, Iceland, Hungary, Malaysia, Tonga, Russia, Indonesia, Canada, Haiti, Botswana, Senegal, Cameroon, Malta, Ghana, Estonia, United States, Bosnia and Herzegovina, Netherlands, Chile, Madagascar, Laos, Namibia, Yemen, Niger, Swaziland, Argentina, Norway, Afghanistan, Montenegro, Cape Verde, Bolivia, Guatemala, Croatia, Tajikistan, Tanzania, Seychelles, Mongolia. A well-built logistics system and a partnership network cheer us to send our units anywhere in the planet on-time without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, contact us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | 0 ... 10 bar |
Ambient temperature min./max. | -15 ... 80 °C |
Medium | Compressed air |
Direction of pneumatic port (1) | On the side |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |
Seal | Acrylonitrile butadiene rubber |