We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822061504
Description
Functional principle | double-acting |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 50 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822061504, get in touch with FAMAGA, the world's top distributor of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of spare parts and special attention to each user. We understand everyone, who liased with us - therefore, our regular clients receive the most acceptable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Mali, Antigua and Barbuda, Tunisia, Belgium, United States, Dominica, Chile, Malaysia, France, Kenya, Tonga, Iran, Canada, Greece, Guatemala, Lithuania, Netherlands, North Korea, The Bahamas, Belarus, Eswatini, East Timor, Austria, Czech Republic, Albania, Ghana, Australia, South Korea, Central African Republic, Burkina Faso, Serbia, Zambia, Uruguay, Kazakhstan, Mauritius, Niger, Argentina, Senegal, Laos, India, Ireland, Algeria, Afghanistan. A well-shaped logistics series and a partnership network let us to send our goods anywhere in the world as soon as possible without damaging product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or book, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 65 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Hydraulic shock absorber on rear side are included in scope of delivery |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |