We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822064003
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Stroke | 100 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822064003, call FAMAGA, the world's the best vendor of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are symbolized in the quality of spare parts and individual attention to each orderer. We appreciate everyone, who liased with us - so, our regular consumers procure the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, San Marino, Czech Republic, Ukraine, Macedonia, Mexico, Portugal, France, Bulgaria, Estonia, Liberia, Greece, Nigeria, Bosnia and Herzegovina, South Sudan, Saudi Arabia, Kyrgyzstan, Latvia, Rwanda, Georgia, Armenia, Croatia, Brunei, Laos, Turkmenistan, Central African Republic, Australia, Burkina Faso, Bangladesh, Uzbekistan, Swaziland, Ecuador, Yemen, Mauritania, Israel, El Salvador, Uganda, Malta, Ghana, Paraguay, Algeria, Hungary, Moldova, Afghanistan, Eswatini, Dominica. A advanced logistics network and a partnership network allow us to send our products anywhere in the globe on-time without compromising product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |