We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822406331
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M5 |
Stroke | 10 mm |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822406331, reach FAMAGA, the world's dominant producer of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and special attention to each consumer. We esteem everyone, who liased with us - thus, our regular consumers get the most flexible purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such clients, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Bangladesh, Niger, Slovakia, Costa Rica, Turkmenistan, Lesotho, South Korea, Kazakhstan, Rwanda, Togo, Uganda, Liechtenstein, Japan, Zimbabwe, Central African Republic, Luxembourg, Israel, Albania, Grenada, Libya, Norway, Belize, Suriname, Tunisia, Macedonia, Azerbaijan, Denmark, Nepal, Uruguay, China, Tonga, Laos, Sierra Leone, Equatorial Guinea, Kenya, New Zealand, Senegal, Haiti, Namibia, Tanzania. A well-shaped logistics link and a partnership network allow us to dispatch our items anywhere in the globe quickly without damaging product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. For 0822406310 piston material: Polyurethane |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |