We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822330209
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822330209, reach FAMAGA, the world's the best producer of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and particular attention to each consumer. We esteem everyone, who collaborated with us - therefore, our regular clients get the most convenient purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Laos, Sri Lanka, Angola, Myanmar, Namibia, New Zealand, Chile, Chad, Tanzania, Palestine, Djibouti, Greece, United Arab Emirates, Saudi Arabia, Belgium, Guatemala, Uruguay, Swaziland, India, Slovakia, Macedonia, Tunisia, Montenegro, Mongolia, Latvia, Hungary, Nicaragua, Bangladesh, Israel, Czech Republic, Iraq, Senegal, Cameroon, Paraguay, Ghana, Andorra, Belize, Togo, Central African Republic, Morocco, Tonga, Brunei, Austria, Uganda, Zambia, Qatar. A well-shaped logistics system and a partnership network assist us to ship our elements anywhere in the planet promptly without damaging product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |