We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822061124
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 125 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822061124, make contact with FAMAGA, the world's influential producer of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each purchaser. We admire everyone, who worked with us - therefore, our regular customers procure the most flexible purchase conditions and discounts on the industrial equipment market. At present, there are more than 4500 such clients, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Eswatini, United States, Sweden, Chile, Monaco, India, Luxembourg, Burundi, Ghana, Congo, Hungary, Burma, Turkmenistan, Myanmar, Lithuania, Greece, Switzerland, Tonga, Chad, Bangladesh, Peru, Belize, Mongolia, Kenya, Swaziland, Finland, China, Israel, Serbia, Ireland, Mozambique, Sudan, Seychelles, Botswana, Brazil, Sierra Leone, New Zealand, Tunisia, Kazakhstan, Paraguay, Iraq, Rwanda, Slovakia, Brunei, Macedonia, Zimbabwe. A advanced logistics bond and a partnership network let us to deliver our items anywhere in the globe as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |