We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822330202
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822330202, contact FAMAGA, the world's key vendor of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of products and particular attention to each purchaser. We value everyone, who worked with us - therefore, our regular clients obtain the most favorable purchase forms and discounts on the factory-made equipment market. Today, there are more than 4000 such clients, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Dominica, Moldova, Honduras, United Arab Emirates, Liberia, Libya, Portugal, Papua New Guinea, Mali, Jordan, Mauritania, Turkmenistan, Andorra, Mauritius, Azerbaijan, Netherlands, Guinea, Niger, Ecuador, Croatia, Algeria, Tonga, Burundi, Paraguay, Bolivia, Namibia, Cyprus, Togo, Kyrgyzstan, Pakistan, South Korea, Bangladesh, Seychelles, Uruguay, United States, Chile, El Salvador, Sudan, Denmark, Iran, Thailand, North Korea, Senegal, Ghana, Costa Rica, Argentina, Ukraine. A well-shaped logistics chains and a partnership network guide us to ship our goods anywhere in the planet on-time without damaging product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |