We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637846
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 20 mm |
Piston rod thread | M5 |
Standardization | ISO 15524 |
Stroke | 30 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637846, get in touch with FAMAGA, the world's foremost vendor of factory-made equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of products and special attention to each purchaser. We respect everyone, who engaged with us - therefore, our regular buyers bring in the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Nepal, Niger, Zimbabwe, Russia, Antigua and Barbuda, Colombia, Yemen, Peru, Honduras, Central African Republic, Djibouti, United States, South Sudan, Romania, Tanzania, Suriname, Monaco, Estonia, Mali, Philippines, Benin, Serbia, Tajikistan, Hungary, Swaziland, Moldova, Israel, Costa Rica, Senegal, Angola, Sudan, Cyprus, Iraq, Iran, Dominica, Iceland, Switzerland, Ireland, Malaysia, North Korea, Botswana, Malta, Georgia, Cape Verde, Kuwait, Burkina Faso. A well-built logistics network and a partnership network allow us to dispatch our items anywhere in the world as soon as possible without discrediting product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |