We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822030201
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822030201, catch up with FAMAGA, the world's influential distributor of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of goods and individual attention to each purchaser. We praise everyone, who worked with us - so, our regular purchasers accept the most desirable purchase terms and discounts on the industrial equipment market. At present, there are more than 3500 such clients, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Suriname, Chile, South Africa, Angola, Cameroon, Canada, Kuwait, Finland, Oman, Bangladesh, Cape Verde, Guatemala, El Salvador, Kenya, Dominica, Guyana, Serbia, Argentina, Malaysia, Ireland, Albania, Netherlands, Rwanda, Nepal, Niger, Kyrgyzstan, Zimbabwe, Thailand, Georgia, Algeria, United Arab Emirates, Bosnia and Herzegovina, New Zealand, East Timor, Laos, Togo, Egypt, Cyprus, Andorra, United States, Tonga, Philippines, Luxembourg, Morocco, Poland. A advanced logistics connection and a partnership network guide us to conduct our elements anywhere in the globe immediately without damaging product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or make a request, contact us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |