We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822431303
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822431303, catch up with FAMAGA, the world's central retailer of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each client. We admire everyone, who cooperated with us - thus, our regular clients pick up the most flexible purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Myanmar, Suriname, The Bahamas, Nigeria, Albania, Burma, Colombia, Kazakhstan, Uzbekistan, Malta, Liberia, Rwanda, Iran, Armenia, Egypt, Nicaragua, Georgia, Libya, Yemen, Greece, Thailand, Austria, Syria, Azerbaijan, Nepal, Belize, East Timor, Ecuador, Mongolia, Moldova, Kenya, Cameroon, Mexico, Chile, Australia, Namibia, Botswana, Turkey, Pakistan, Zambia, Czech Republic, Denmark, Bangladesh. A well-shaped logistics system and a partnership network guide us to conduct our units anywhere in the globe quickly without compromising product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or order, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |