We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822431203
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822431203, communicate with FAMAGA, the world's leading company of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each client. We esteem everyone, who collaborated with us - therefore, our regular purchasers receive the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such customers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Slovenia, Central African Republic, Turkmenistan, Serbia, Lithuania, Oman, Burma, Madagascar, Nicaragua, Malaysia, The Bahamas, Mozambique, Morocco, Luxembourg, Chile, Azerbaijan, Cameroon, Mexico, Thailand, Botswana, Nepal, Latvia, Sudan, Russia, New Zealand, Angola, Equatorial Guinea, El Salvador, Albania, Guatemala, Togo, Croatia, Kazakhstan, Burkina Faso, Suriname, United States, Argentina, Kuwait, Namibia, Samoa, Comoros, United Arab Emirates, Mauritius. A well-built logistics chains and a partnership network guide us to ship our units anywhere in the world quickly without damaging product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or make a request, contact us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |