We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480060078
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480060078, contact FAMAGA, the world's top supplier of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of products and particular attention to each client. We appreciate everyone, who liased with us - thus, our regular clients obtain the most helpful purchase conditions and discounts on the industrial equipment market. Today, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, South Sudan, Italy, Bahamas, Eswatini, South Korea, Libya, France, Burundi, Haiti, United Arab Emirates, Peru, Cyprus, Sweden, Canada, Burkina Faso, Thailand, Nigeria, East Timor, Romania, Afghanistan, Chad, Costa Rica, El Salvador, Bolivia, Nicaragua, Djibouti, Georgia, Togo, Mozambique, Brunei, Ireland, Serbia, Equatorial Guinea, Nepal, Tunisia, Madagascar, Ghana, The Gambia, Kazakhstan, Comoros, Syria, Pakistan, Norway. A well-shaped logistics bond and a partnership network let us to ship our goods anywhere in the world on-time without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as stay in control.
To inquire or place an order, get in touch with us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Ø25 not according to ISO 15552 The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. Ø25 not according to ISO 15552 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |