We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480193186
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480193186, make contact with FAMAGA, the world's leading supplier of factory-made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of merchandises and private attention to each client. We praise everyone, who cooperated with us - so, our regular purchasers get the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, The Gambia, Papua New Guinea, Honduras, Ukraine, Comoros, Ghana, Lebanon, Cameroon, Cuba, Togo, Pakistan, Switzerland, Mauritius, Eritrea, Seychelles, Slovenia, Uruguay, Zambia, Zimbabwe, Monaco, Brunei, Turkmenistan, Romania, Jamaica, Cape Verde, El Salvador, Luxembourg, Malaysia, Estonia, Afghanistan, Nepal, Belarus, Samoa, Bosnia and Herzegovina, Dominica, Tonga, Swaziland, Turkey, Croatia, Senegal, Madagascar, Haiti, Ireland, Kiribati. A well-shaped logistics connection and a partnership network guide us to ship our units anywhere in the world quickly without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized Die-cast aluminum, anodized |
End cover | Aluminum, anodized Die-cast aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |